وصف المنتج
وصف المنتج
The NFR180 series planetary gearboxes are designed and machined as a single unit with special tapered roller bearings to provide high radial load, high torque, ultra-precision, and small size. The ND series uses in highly rigid industries such as fiber optic laser equipment, floor track equipment, robot seventh axis, Parallel robots (spider hand) machine tools, and rotating arms.
Product Name: High Precision Planetary Reducer
Product Series: NFR180 Series
Product features: high torque, high load, ultra-precision, small size
وصف المنتج:
Integrated design concept with high-strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimizes power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years
مزايانا
High torque
High load
ultra-precision
Small size
صور تفصيلية
معايير المنتج
| Segment number | Double segment | ||||||||||||||||
| Ratio | i | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 140 | 160 | 180 | 200 |
| Rated output torque | Nm | 1140 | 1040 | 1040 | 950 | 850 | 1140 | 1040 | 1040 | 950 | 850 | 850 | 1040 | 1040 | 950 | 850 | 850 |
| Emergency stop torque | Nm | Three times of Maximum Output Torque | |||||||||||||||
| Rated input speed | Rpm | 3000 | |||||||||||||||
| Max input speed | Rpm | 6000 | |||||||||||||||
| Ultraprecise backlash | arcmin | ≤4 | |||||||||||||||
| Precision backlash | arcmin | ≤7 | |||||||||||||||
| Standard backlash | arcmin | ≤9 | |||||||||||||||
| Torsional rigidity | Nm/arcmin | 145 | |||||||||||||||
| Max.bending moment | Nm | 18000 | |||||||||||||||
| Max.axial force | شمال | 19500 | |||||||||||||||
| Service life | hr | 20000(10000 under continuous operation) | |||||||||||||||
| كفاءة | % | ≥92% | |||||||||||||||
| Weight | كيلوغرام | 54 | |||||||||||||||
| Operating Temperature | ºC | -10ºC~+90ºC | |||||||||||||||
| Lubrication | Synthetic grease | ||||||||||||||||
| Protection class | IP64 | ||||||||||||||||
| Mounting Position | All directions | ||||||||||||||||
| Noise level(N1=3000rpm,non-loaded) | dB(A) | ≤72 | |||||||||||||||
| Rotary inertia | Kg·cm² | 23.4 | 21.8 | ||||||||||||||
Applicable Industries
Packaging Machinery Mechanical Hand Textile Machinery
Non Standard automation Machine Tool Printing Equipment
الشهادات
نبذة عن الشركة
DESBOER (HangZhou) Transmission Technology Co., Ltd. is a subsidiary of DESBOER (China), which is committed to the design, development, customized production and sales of high precision planetary reducer as 1 of the technology company. Our company has over 10 years of design, production and sales experience, the main products are the high precision planetary reducer, gear, rack, etc., with high quality, short delivery period, high cost performance and other advantages to better serve the demand of global customers. It is worth noting that we remove the intermediate link sale from the factory directly to customers, so that you can get the most ideal price and also get our best quality service simultaneously.
About Research
In order to strengthen the advantages of products in the international market, the head company in Kyoto, Japan to established KABUSHIKIKAISYA KYOEKI, mainly engaged in the development of DESBOER high precision planetary reducer, high precision of transmission components such as the development work, to provide the most advanced design technology and the most high-quality products for the international market.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| طلب: | Motor, Machinery, Marine, Agricultural Machinery, CNC Machine |
|---|---|
| وظيفة: | Change Drive Torque, Speed Changing, Speed Reduction |
| تَخطِيط: | Plantery Type |
| صلابة: | سطح السن المقوى |
| تثبيت: | All Directions |
| خطوة: | خطوة مزدوجة |
| التخصيص: |
متاح
|
|
|---|
كيف يتم قياس كفاءة محرك التروس، وما هي العوامل التي يمكن أن تؤثر عليها؟
كفاءة محرك التروس هي مقياس لمدى فعاليته في تحويل الطاقة الكهربائية الداخلة إلى طاقة ميكانيكية خارجة. وهي تشير إلى قدرة المحرك على تقليل الفاقد إلى أدنى حد وزيادة كفاءة تحويل الطاقة إلى أقصى حد. تُقاس كفاءة محرك التروس عادةً باستخدام طرق محددة، وتؤثر عليها عدة عوامل. إليك شرح مفصل:
قياس الكفاءة:
تُقاس كفاءة محرك التروس عادةً بمقارنة القدرة الميكانيكية الناتجة (Pخارج) إلى طاقة الإدخال الكهربائية (Pفيصيغة حساب الكفاءة هي:
الكفاءة = (Pخارج / Pفي) * 100%
يمكن تحديد القدرة الميكانيكية الناتجة عن طريق قياس عزم الدوران (T) الذي ينتجه المحرك وسرعة دورانه (ω). صيغة القدرة الميكانيكية هي:
Pخارج = T * ω
يمكن قياس القدرة الكهربائية الداخلة عن طريق مراقبة التيار (I) والجهد (V) المُزوَّدين للمحرك. صيغة القدرة الكهربائية هي:
Pفي = V * I
من خلال استبدال هذه القيم في صيغة الكفاءة، يمكن حساب كفاءة محرك التروس كنسبة مئوية.
العوامل المؤثرة على الكفاءة:
تؤثر عدة عوامل على كفاءة محرك التروس. فيما يلي بعض العوامل البارزة:
- الاحتكاك والخسائر الميكانيكية: قد يؤدي الاحتكاك بين الأجزاء المتحركة، مثل التروس والمحامل، إلى خسائر ميكانيكية ويقلل من الكفاءة الإجمالية لمحرك التروس. ويمكن تحسين الكفاءة عن طريق تقليل الاحتكاك من خلال التشحيم المناسب، واستخدام مكونات عالية الجودة، والتصميم الفعال.
- كفاءة التروس: يؤثر تصميم وجودة التروس المستخدمة في محرك التروس على كفاءته. قد تتسبب مجموعات التروس في خسائر ميكانيكية نتيجة لتعشيق التروس، أو عدم محاذاتها، أو وجود خلوص ميكانيكي. ويمكن تحسين الكفاءة باستخدام تروس مصممة جيدًا ذات ملامح أسنان مناسبة وتقليل خسائر مجموعة التروس إلى أدنى حد.
- نوع المحرك وبنيته: تختلف أنواع المحركات (مثل محركات التيار المستمر ذات الفرش، ومحركات التيار المستمر بدون فرش، ومحركات التيار المتردد الحثية) في خصائص كفاءتها. كما يؤثر تصميم المحرك، كجودة المواد المغناطيسية، ومقاومة الملفات، وتصميم الدوار، على كفاءته. لذا، فإن اختيار محركات ذات معدلات كفاءة أعلى يُحسّن الكفاءة الإجمالية لمحرك التروس.
- الخسائر الكهربائية: يمكن أن تؤدي الخسائر الكهربائية، مثل الخسائر المقاومة في ملفات المحرك أو في دوائر تشغيل المحرك، إلى انخفاض الكفاءة. ويمكن الحد من هذه الخسائر بتقليل المقاومة، وتحسين إلكترونيات تشغيل المحرك، واستخدام خوارزميات تحكم فعالة.
- شروط التحميل: تؤثر ظروف التشغيل وخصائص الحمل الواقع على محرك التروس على كفاءته. فالأحمال الثقيلة والسرعات العالية والتسارع والتباطؤ المتكرر قد تزيد من الفاقد وتقلل الكفاءة. ويمكن تحسين الكفاءة من خلال مطابقة مواصفات محرك التروس مع متطلبات التطبيق وتحسين ظروف الحمل.
- درجة حرارة: يمكن أن تؤثر درجات الحرارة المرتفعة بشكل كبير على كفاءة محرك التروس. فالحرارة الزائدة قد تزيد من فقد الطاقة الناتج عن المقاومة، وتقلل من فعالية التشحيم، وتؤثر على الخصائص المغناطيسية لمكونات المحرك. لذا، فإن استخدام تقنيات التبريد والإدارة الحرارية المناسبة أمر ضروري للحفاظ على الكفاءة المثلى.
من خلال مراعاة هذه العوامل وتطبيق تدابير لتقليل الفاقد وتحسين الأداء، يمكن تعزيز كفاءة محرك التروس. غالبًا ما يقدم المصنّعون مواصفات كفاءة لمحركات التروس، مما يسمح للمستخدمين باختيار المحركات التي تلبي متطلبات الكفاءة الخاصة بهم على أفضل وجه لتطبيقات محددة.
Are there environmental benefits to using gear motors in certain applications?
Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:
1. Energy Efficiency:
Gear motors can improve energy efficiency in various ways:
- Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
- Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.
2. Reduced Resource Consumption:
The use of gear motors can lead to reduced resource consumption and environmental impact:
- Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
- Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.
3. Noise Reduction:
Gear motors can contribute to a quieter and more environmentally friendly working environment:
- تخفيف الضوضاء: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.
4. Precision and Control:
Gear motors offer enhanced precision and control, which can lead to environmental benefits:
- Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
- Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.
In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.
ما هي أنواع التروس المختلفة المستخدمة في محركات التروس، وكيف تؤثر على الأداء؟
تُستخدم أنواع مختلفة من التروس في محركات التروس، ولكل نوع خصائصه الفريدة وتأثيره على الأداء. يعتمد اختيار نوع التروس على المتطلبات المحددة للتطبيق، بما في ذلك عزم الدوران والسرعة والكفاءة ومستوى الضوضاء وقيود المساحة. إليك شرح مفصل لأنواع التروس المختلفة المستخدمة في محركات التروس وتأثيرها على الأداء:
1. التروس المسننة:
تُعدّ التروس المستقيمة أكثر أنواع التروس شيوعًا في محركات التروس. تتميز هذه التروس بأسنان مستقيمة موازية لمحور الترس، وتتشابك مع ترس مستقيم آخر لنقل الطاقة. توفر التروس المستقيمة كفاءة عالية، وتشغيلًا موثوقًا، وفعالية من حيث التكلفة. مع ذلك، قد تُصدر ضوضاءً ملحوظة نتيجة تشابك الأسنان، وقد تُنتج قوى دفع محورية. تُناسب التروس المستقيمة التطبيقات التي تتطلب نقل عزم دوران عالٍ وسرعات دوران متوسطة إلى عالية.
2. التروس الحلزونية:
تتميز التروس الحلزونية بأسنان مائلة تُقطع بزاوية بالنسبة لمحور الترس. يتيح هذا التصميم الحلزوني تعشيقًا تدريجيًا وتلامسًا أكثر سلاسة بين الأسنان، مما يُقلل الضوضاء والاهتزاز مقارنةً بالتروس المستقيمة. توفر التروس الحلزونية قدرة تحمل أعلى للأحمال، وهي مناسبة للتطبيقات التي تتطلب نقل عزم دوران عالٍ وسرعات دوران متوسطة إلى عالية. تُستخدم هذه التروس بشكل شائع في محركات التروس التي تتطلب تشغيلًا منخفض الضوضاء، كما هو الحال في تطبيقات السيارات والآلات الصناعية.
3. التروس المخروطية:
تتميز التروس المخروطية بأسنان مقطوعة على سطح مخروطي. تُستخدم هذه التروس لنقل الطاقة بين أعمدة متقاطعة، عادةً بزوايا قائمة. قد تكون أسنان التروس المخروطية مستقيمة (تروس مخروطية مستقيمة) أو منحنية (تروس مخروطية حلزونية). توفر هذه التروس نقلًا فعالًا للطاقة وتحكمًا دقيقًا في الحركة في التطبيقات التي تتطلب تغيير اتجاه الأعمدة. تُستخدم التروس المخروطية بشكل شائع في محركات التروس لتطبيقات مثل أنظمة التوجيه، وآلات التشغيل، وآلات الطباعة.
4. التروس الدودية:
تتكون التروس الدودية من دودة (نوع من البراغي) وترس مُتزاوج يُسمى عجلة الدودة. تحتوي الدودة على لولب حلزوني يتعشق مع عجلة الدودة، مما ينتج عنه نسبة تخفيض تروس عالية وصغيرة الحجم. توفر التروس الدودية نقل عزم دوران عالٍ، وتشغيلًا منخفض الضوضاء، وخاصية القفل الذاتي التي تمنع الحركة العكسية. تُستخدم هذه التروس بشكل شائع في محركات التروس للتطبيقات التي تتطلب قدرة عالية على تخفيض التروس والقفل، مثل آليات الرفع، وأنظمة النقل، وأدوات الآلات.
5. التروس الكوكبية:
تتكون التروس الكوكبية، والمعروفة أيضًا بالتروس الدائرية، من ترس شمسي مركزي، وعدة تروس كوكبية، وترس حلقي خارجي. تتعشق التروس الكوكبية مع كل من الترس الشمسي والترس الحلقي، مما يُشكل نظام تروس صغير الحجم وفعال. توفر التروس الكوكبية نقلًا عاليًا لعزم الدوران، ونسب تخفيض عالية، وتوزيعًا ممتازًا للأحمال. وهي شائعة الاستخدام في محركات التروس للتطبيقات التي تتطلب عزم دوران عالٍ وحجمًا صغيرًا، مثل الروبوتات، وناقلات الحركة في السيارات، والآلات الصناعية.
6. نظام التوجيه المسنني:
تتكون تروس الجريدة المسننة من مسنن خطي (قضيب مستقيم مسنن) وترس صغير (ترس أسطواني ذو قطر صغير). يتعشق الترس الصغير مع المسنن لتحويل الحركة الدورانية إلى حركة خطية أو العكس. توفر تروس الجريدة المسننة تحكمًا دقيقًا في الحركة الخطية، وتُستخدم عادةً في محركات التروس لتطبيقات مثل المشغلات الخطية، وآلات التحكم الرقمي الحاسوبي، وأنظمة التوجيه.
يعتمد اختيار نوع التروس في محرك التروس على عوامل مثل عزم الدوران المطلوب، والسرعة، والكفاءة، ومستوى الضوضاء، وقيود المساحة. يوفر كل نوع من التروس مزايا محددة ويؤثر على أداء محرك التروس بشكل مختلف. باختيار نوع التروس المناسب، يمكن تحسين محركات التروس لتطبيقاتها المقصودة، مما يضمن نقل طاقة فعال وموثوق.
editor by CX 2023-12-29