Tag Archives: motor air pump

China factory Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor a/c vacuum pump

Product Description

(SIEMENS) CHINAMFG Motor

Motor Summary
 

Frame size 80- 355
Pole 2-8
Rated voltage 220/380V, 380/660V
Frequency 50Hz/60Hz
Power 0.55kw-315Kw
Protection degree IP55
Cooling method IC411
Insulation class F
Ambient Temperature -20°C~40°C
Altitude not exceed 1-2012 and efficiency class IE2.
  • Optimized compact style construction.
  • Standard mounting construction according to IEC 60034-7: IM B3, IM B5, IM B35 and etc.
  • All motors are designed to IP55 degree of protection (IEC 60034-5).
  • Regreasing devices for FS280~355 as standard,and for FS100~250 as option.
  • Reinforced bearings for increased cantilever forces for FS100 ~ 355 as option.
  • Winding protections with PTC, PT100 and KTY84-130 as option.
  • Insulation system is designed for temperature class 155 (F). At rated output with line-fed operation, the motors can be used in temperature class 130 (B).
  • Environmental

      Degrees of motor protection IP55 (IEC 60034-5).
      Altitude shall not exceed 1000m above sea-level (IEC 60034-1).
      Allowed air temperature between -20 ºC and 40 ºC (IEC 60034-1).
      Permitted relative humidity:  
     -20 ºC ≤ T ≤ 20 ºC:100 %  
     20 ºC < T ≤ 30 ºC:95 %  
    30 ºC < T ≤ 40 ºC:55 %  

    Tips:
    Bearing life time (nominal lifetime)
    The bearing lifetime of motors with horizontal type of construction is at least 40,000 hours if there is no additional axial loading at the coupling output and at least 20,000 hours with the maximum admissible loads. This assumes that the motor is operated at 50Hz.
    When the motor runs outside of normal conditions, the bearing life will be reduced, such as the following conditions.

    • When 1TL0001 motor runs beyond the rated speed, the 
      increase of motor vibration will result in the extra radial and axial force on bearing. This will reduce the life of bearing;
       
    • When the motor vibration increase due to the environment or 
      other equipment, the bearing also will endure more radial and axial force. This also will reduce the life of bearing;
       
    • If the coolant temperature is increased by 10 ºC, the grease lifetime and regreasing interval is halved.

    Application fields: machine tools, water pump, blower, compressor, and transportation, print, agriculture, food and more industries.

    FAQ

    Q: What is your MOQ of this item?
    A: 5PCS.
         For the first time cooperation, we accept trial sample order.
     
    Q: What’s your payment terms?
    A: 30% T/T deposit, 70% balance before shipment or L/C at sight.
     
    Q: What’s the delivery time?
    A: 25-30 days after receiving your L/C or T/T deposit.

    Q: Can we used our own brand on motors ?
    A: Sure, we can offer OEM service,
         manufacture with your authorized brand.

    Certificate

    Office Block

     

    Team

     

     

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Application: Industrial, Universal
    Operating Speed: Constant Speed
    Number of Stator: Three-Phase
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    gear motor

    Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?

    Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:

    1. Heavy-Duty Industrial Applications:

    Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:

    • Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
    • Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
    • Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
    • Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.

    2. Smaller-Scale Uses:

    While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:

    • Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
    • Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
    • Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
    • Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.

    Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.

    gear motor

    Can gear motors be used for precise positioning, and if so, what features enable this?

    Yes, gear motors can be used for precise positioning in various applications. The combination of gear mechanisms and motor control features enables gear motors to achieve accurate and repeatable positioning. Here’s a detailed explanation of the features that enable gear motors to be used for precise positioning:

    1. Gear Reduction:

    One of the key features of gear motors is their ability to provide gear reduction. Gear reduction refers to the process of reducing the output speed of the motor while increasing the torque. By using the appropriate gear ratio, gear motors can achieve finer control over the rotational movement, allowing for more precise positioning. The gear reduction mechanism enables the motor to rotate at a slower speed while maintaining higher torque, resulting in improved accuracy and control.

    2. High Resolution Encoders:

    Many gear motors are equipped with high-resolution encoders. An encoder is a device that measures the position and speed of the motor shaft. High-resolution encoders provide precise feedback on the motor’s rotational position, allowing for accurate position control. The encoder signals are used in conjunction with motor control algorithms to ensure precise positioning by monitoring and adjusting the motor’s movement in real-time. The use of high-resolution encoders greatly enhances the gear motor’s ability to achieve precise and repeatable positioning.

    3. Closed-Loop Control:

    Gear motors with closed-loop control systems offer enhanced positioning capabilities. Closed-loop control involves continuously comparing the actual motor position (as measured by the encoder) with the desired position and making adjustments to minimize any position error. The closed-loop control system uses feedback from the encoder to adjust the motor’s speed, direction, and torque, ensuring accurate positioning even in the presence of external disturbances or variations in the load. Closed-loop control enables gear motors to actively correct for position errors and maintain precise positioning over time.

    4. Stepper Motors:

    Stepper motors are a type of gear motor that provides excellent precision and control for positioning applications. Stepper motors operate by converting electrical pulses into incremental steps of movement. Each step corresponds to a specific angular displacement, allowing precise positioning control. Stepper motors offer high step resolution, allowing for fine position adjustments. They are commonly used in applications that require precise positioning, such as robotics, 3D printers, and CNC machines.

    5. Servo Motors:

    Servo motors are another type of gear motor that excels in precise positioning tasks. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer high torque, high speed, and excellent positional accuracy. Servo motors are capable of dynamically adjusting their speed and torque to maintain the desired position accurately. They are widely used in applications that require precise and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems.

    6. Motion Control Algorithms:

    Advanced motion control algorithms play a crucial role in enabling gear motors to achieve precise positioning. These algorithms, implemented in motor control systems or dedicated motion controllers, optimize the motor’s behavior to ensure accurate positioning. They take into account factors such as acceleration, deceleration, velocity profiling, and jerk control to achieve smooth and precise movements. Motion control algorithms enhance the gear motor’s ability to start, stop, and position accurately, reducing position errors and overshoot.

    By leveraging gear reduction, high-resolution encoders, closed-loop control, stepper motors, servo motors, and motion control algorithms, gear motors can be effectively used for precise positioning in various applications. These features enable gear motors to achieve accurate and repeatable positioning, making them suitable for tasks that require precise control and reliable positioning performance.

    gear motor

    In which industries are gear motors commonly used, and what are their primary applications?

    Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:

    1. Robotics and Automation:

    Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.

    2. Automotive Industry:

    The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.

    3. Manufacturing and Machinery:

    Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.

    4. HVAC and Building Systems:

    In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.

    5. Marine and Offshore Industry:

    Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.

    6. Renewable Energy Systems:

    The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.

    7. Medical and Healthcare:

    Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.

    These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.

    China factory Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   a/c vacuum pump		China factory Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   a/c vacuum pump
    editor by CX 2024-03-05

    China Hot selling CHINAMFG Custom DC Geared Motor 24V 8rpm 15W 1500 Rpm Electric Motor for Air Purifier Gear Motor Solution vacuum pump engine

    Product Description

    8mm 4.2V High Efficiency Small DC Reduction Gearbox

     

    Product Description

    Specification

    Model

    Application Parameters Rated Torque of Gear Box
     
    Instant Torque of Gear Box
     
    Gear Ratio
     
    Gear Box Length
     L1
    Rated At No Load
     
    At Rated Load  Overall Length 
     L
    Voltage
     
    Speed
     
    Current
     
    Speed
     
    Current
     
    Torque
     
    VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
    ZWPD008008- 4 4.2 4233 90 3111 155 4 0.4 23.1 50 200 3.6 8.6
    ZWPD008008- 5 4.2 2857 90 2100 155 6 0.6 50 200 5.3
    ZWPD008008- 13 4.2 1122 95 864 155 11 1.1 25.8 100 300 13.0 11.3
    ZWPD008008- 19 4.2 758 95 583 155 16 1.6 100 300 19.2
    ZWPD008008-28 4.2 511 95 394 155 24 2.4 100 300 28.4
    ZWPD008008-47 4.2 306 95 240 160 30 2.9 28.5 200 600 46.7 14.0
    ZWPD008008-69 4.2 207 95 162 160 44 4.3 200 600 69.1
    ZWPD008008-102 4.2 140 95 109 160 65 6.4 200 600 102.4
    ZWPD008008-152 4.2 94 95 74 160 96 9.4 200 600 151.7
    ZWPD008008-168 4.2 84 100 67 160 80 7.8 31.2 300 900 168.0 16.7
    ZWPD008008-249 4.2 56 100 45 160 118 11.6 300 900 248.8
    ZWPD008008-369 4.2 38 100 30 160 175 17.2 300 900 368.6
    ZWPD008008-546 4.2 26 100 21 160 259 25.4 300 900 546.1
    ZWPD008008-809 4.2 17 100 14 160 384 37.7 300 900 809.1

    above specifications just for reference and customizable according to requirements.

    Please let us know your requirements and we will provide you with micro transmission solutions.

    2)2D Drawing

     

    Detailed Photos

     

     

    Application

    Smart wearable devices   watch,VR,AR,XR and etc.
    Household application kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc.
    communication equipment 5G base station,video conference,mobile phone and etc.
    Office automation equipments   scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine,  screen, lifting socket,  display,notebook PC and etc.
    Automotive products  conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc.
    Toys and models  radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc.
    Medical equipments  blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc.
    Industrials   flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc.
    Electric power tools  electric drill, screwdriver,garden tool and etc.
    Precision instruments  optics instruments,automatic vending machine, wire-stripping machine and etc.
    Personal care tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc.
    Consumer electronics camera, mobile phone,digital camera, automatic retracting device,camcorder,  kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc.
    robots educational robot, programming robot, medical robot, escort robot and etc.

    Company Profile

    HangZhou CHINAMFG Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly. 

    Workshop

    Testing Equipment

    1) Competitive Advantages

    • 1) Competitive Advantages
      19+year experience in manufacturing motor gearbox
      We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
      Competitive Price
      Product Performance: Low noise, High efficiency, Long lifespan
      Prompt Delivery: 15 working days after payment
      Small Orders Accepted

     2) Main Products

    • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,

    • Customized worm and gear transmission machinery;
    • Precise electromechanical motion module;
    • Precise component and assembly of plastic and metal powder injection.

     

    Our Services

    • ODM & OEM
    • Gearbox design and development
    • Related technology support
    • Micro drive gearbox custom solution

    Packaging & Shipping

    1) Packing Details

    packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
    Or according to client’s requirement.

    2) Shipping Details

    samples will be shipped within 10 days;
    batch order leading time according to the actual situation.

     

    Certifications

    Certifications

    We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

    and more…

     

    FAQ

    FAQ

    1. Can you make the gearbox with custom specifications?
    YES. We have design and development team, also a great term of engineers, each of them have
    many work years experience.

    2.Do you provide the samples?
    YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.

    3.What is your MOQ?
    Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.

    4. Do you have the item in stock?
    I am sorry we donot have the item in stock, All products are made with orders.

    5. Do you provide technology support?
    YES. Our company have design and development team, we can provide technology support if you
    need.

    6.How to ship to us?
    We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide. 

    7.How to pay the money?
    We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.

    8. How can I know the product is suitable for me?
    Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.

    9. Can I come to your company to visit?
    YES, you can come to our company to visit at anytime, and welcome to visit our company.

    10. How do contact us ?
     Please send an inquiry

    /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Application: Motor, Electric Cars, Motorcycle, Toy, Car, Medical Devices
    Function: Change Drive Torque, Speed Reduction
    Layout: Cycloidal
    Hardness: Hardened Tooth Surface
    Installation: Torque Arm Type
    Step: Customize
    Customization:
    Available

    |

    gear motor

    How is the efficiency of a gear motor measured, and what factors can affect it?

    The efficiency of a gear motor is a measure of how effectively it converts electrical input power into mechanical output power. It indicates the motor’s ability to minimize losses and maximize its energy conversion efficiency. The efficiency of a gear motor is typically measured using specific methods, and several factors can influence it. Here’s a detailed explanation:

    Measuring Efficiency:

    The efficiency of a gear motor is commonly measured by comparing the mechanical output power (Pout) to the electrical input power (Pin). The formula to calculate efficiency is:

    Efficiency = (Pout / Pin) * 100%

    The mechanical output power can be determined by measuring the torque (T) produced by the motor and the rotational speed (ω) at which it operates. The formula for mechanical power is:

    Pout = T * ω

    The electrical input power can be measured by monitoring the current (I) and voltage (V) supplied to the motor. The formula for electrical power is:

    Pin = V * I

    By substituting these values into the efficiency formula, the efficiency of the gear motor can be calculated as a percentage.

    Factors Affecting Efficiency:

    Several factors can influence the efficiency of a gear motor. Here are some notable factors:

    • Friction and Mechanical Losses: Friction between moving parts, such as gears and bearings, can result in mechanical losses and reduce the overall efficiency of the gear motor. Minimizing friction through proper lubrication, high-quality components, and efficient design can help improve efficiency.
    • Gearing Efficiency: The design and quality of the gears used in the gear motor can impact its efficiency. Gear trains can introduce mechanical losses due to gear meshing, misalignment, or backlash. Using well-designed gears with proper tooth profiles and minimizing gear train losses can improve efficiency.
    • Motor Type and Construction: Different types of motors (e.g., brushed DC, brushless DC, AC induction) have varying efficiency characteristics. Motor construction, such as the quality of magnetic materials, winding resistance, and rotor design, can also affect efficiency. Choosing motors with higher efficiency ratings can improve overall gear motor efficiency.
    • Electrical Losses: Electrical losses, such as resistive losses in motor windings or in the motor drive circuitry, can reduce efficiency. Minimizing resistance, optimizing motor drive electronics, and using efficient control algorithms can help mitigate electrical losses.
    • Load Conditions: The operating conditions and load characteristics placed on the gear motor can impact its efficiency. Heavy loads, high speeds, or frequent acceleration and deceleration can increase losses and reduce efficiency. Matching the gear motor’s specifications to the application requirements and optimizing load conditions can improve efficiency.
    • Temperature: Elevated temperatures can significantly affect the efficiency of a gear motor. Excessive heat can increase resistive losses, reduce lubrication effectiveness, and affect the magnetic properties of motor components. Proper cooling and thermal management techniques are essential to maintain optimal efficiency.

    By considering these factors and implementing measures to minimize losses and optimize performance, the efficiency of a gear motor can be enhanced. Manufacturers often provide efficiency specifications for gear motors, allowing users to select motors that best meet their efficiency requirements for specific applications.

    gear motor

    Are there environmental benefits to using gear motors in certain applications?

    Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:

    1. Energy Efficiency:

    Gear motors can improve energy efficiency in various ways:

    • Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
    • Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.

    2. Reduced Resource Consumption:

    The use of gear motors can lead to reduced resource consumption and environmental impact:

    • Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
    • Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.

    3. Noise Reduction:

    Gear motors can contribute to a quieter and more environmentally friendly working environment:

    • Noise Dampening: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.

    4. Precision and Control:

    Gear motors offer enhanced precision and control, which can lead to environmental benefits:

    • Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
    • Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.

    In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.

    gear motor

    What is a gear motor, and how does it combine the functions of gears and a motor?

    A gear motor is a type of motor that incorporates gears into its design to combine the functions of gears and a motor. It consists of a motor, which provides the mechanical power, and a set of gears, which transmit and modify this power to achieve specific output characteristics. Here’s a detailed explanation of what a gear motor is and how it combines the functions of gears and a motor:

    A gear motor typically consists of two main components: the motor and the gear system. The motor is responsible for converting electrical energy into mechanical energy, generating rotational motion. The gear system, on the other hand, consists of multiple gears with different sizes and tooth configurations. These gears are meshed together in a specific arrangement to transmit and modify the output torque and speed of the motor.

    The gears in a gear motor serve several functions:

    1. Torque Amplification:

    One of the primary functions of the gear system in a gear motor is to amplify the torque output of the motor. By using gears with different sizes, the input torque can be effectively multiplied or reduced. This allows the gear motor to provide higher torque at lower speeds or lower torque at higher speeds, depending on the gear arrangement. This torque amplification is beneficial in applications where high torque is required, such as in heavy machinery or vehicles.

    2. Speed Reduction or Increase:

    The gear system in a gear motor can also be used to reduce or increase the rotational speed of the motor output. By utilizing gears with different numbers of teeth, the gear ratio can be adjusted to achieve the desired speed output. For example, a gear motor with a higher gear ratio will output lower speed but higher torque, whereas a gear motor with a lower gear ratio will output higher speed but lower torque. This speed control capability allows for precise matching of motor output to the requirements of specific applications.

    3. Directional Control:

    Gears in a gear motor can be used to control the direction of rotation of the motor output shaft. By employing different combinations of gears, such as spur gears, bevel gears, or worm gears, the rotational direction can be changed. This directional control is crucial in applications where bidirectional movement is required, such as in conveyor systems or robotic arms.

    4. Load Distribution:

    The gear system in a gear motor helps distribute the load evenly across multiple gears, which reduces the stress on individual gears and increases the overall durability and lifespan of the motor. By sharing the load among multiple gears, the gear motor can handle higher torque applications without putting excessive strain on any particular gear. This load distribution capability is especially important in heavy-duty applications that require continuous operation under demanding conditions.

    By combining the functions of gears and a motor, gear motors offer several advantages. They provide torque amplification, speed control, directional control, and load distribution capabilities, making them suitable for various applications that require precise and controlled mechanical power. Gear motors are commonly used in industries such as robotics, automotive, manufacturing, and automation, where reliable and efficient power transmission is essential.

    China Hot selling CHINAMFG Custom DC Geared Motor 24V 8rpm 15W 1500 Rpm Electric Motor for Air Purifier Gear Motor Solution   vacuum pump engine	China Hot selling CHINAMFG Custom DC Geared Motor 24V 8rpm 15W 1500 Rpm Electric Motor for Air Purifier Gear Motor Solution   vacuum pump engine
    editor by CX 2024-03-04

    China wholesaler CE Approved 0.18kw-15kw Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower vacuum pump distributors

    Product Description

    Ce Approved 0.18kw-15kw Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower

    Product Description

    1. Light in weight and non-rusting.
    2. Smooth in running, can work a long time in dreadful conditions.
    3. High efficiency, low noise.
    4. Good-looking in appearance, durable in service life, and small in volume.

    Detailed Photos

     

     

    Product Parameters

     

    Stainless Steel Motor Power 1/4HP~30HP
    Frame Size IEC 63 ~ 180 B5 B14, NEMA 56 ~ 286TC
    Motor Phase Single or Three
    Voltage (208-230)230/460V
    Poles 2, 4, 6, 8 poles
    Protection Class IP69K
    Cooling method TENV or TEFC
    Mounting Type B14, B3, B5, B35, B34
    Ambient Temperature -15 ~ +40 °C
    Altitude ≤1000M
    Material Stainless steel 304

     

    Stainless Steel Gearbox Model 030 ~ 090
    Power 0.06kw ~ 4kw
    Input speed 750rpm ~ 2000rpm
    Reduction ratio 1/5 ~ 1/100
    Input motor AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo
    Output shaft Solid shaft / Hollow shaft / Output flange…
    Dimension standard Metric size / Inch size
    Material of housing Stainless steel 304
    Accessories Flange / CHINAMFG shaft / Torque arm / Cover …

     

    Typical applications

    Company Profile

    Certifications

     

    FAQ

    Q: Can you make the stainless steel motor with customization?
    A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc.

    Q: Do you provide samples?
    A: Yes. A sample is available for testing.

    Q: What’s your lead time?
    A: Standard products need 5-30days, a bit longer for customized products.

    Q: Do you provide technical support?
    A: Yes. Our company have design and development team, we can provide technical support if you
    need.

    Q: How to ship to us?
    A: It is available by air, or by sea, or by train.

    Q: How to pay the money?
    A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.

    Q: How can I know the product is suitable for me?
    A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

    Q: Can I come to your company to visit?
    A: Yes, you are welcome to visit us at any time.

    Q: How shall we contact you?
    A: You can send an inquiry directly, and we will respond within 24 hours.

    Application: Food Machine
    Speed: Constant Speed
    Number of Stator: Single or Three Phase
    Samples:
    US$ 50/Piece
    1 Piece(Min.Order)

    |

    Order Sample

    1 pc per carton
    Customization:
    Available

    |

    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.







    about shipping cost and estimated delivery time.
    Payment Method:







     

    Initial Payment



    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    gear motor

    Where can individuals find reliable resources for learning more about gear motors and their applications?

    Individuals seeking to learn more about gear motors and their applications have access to various reliable resources that provide valuable information and insights. Here are some sources where individuals can find reliable information about gear motors:

    1. Manufacturer Websites:

    Manufacturer websites are a primary source of information about gear motors. Gear motor manufacturers often provide detailed product specifications, application guides, technical documentation, and educational materials on their websites. These resources offer insights into different gear motor types, features, performance characteristics, and application considerations. Manufacturer websites are a reliable and convenient starting point for learning about gear motors.

    2. Industry Associations and Organizations:

    Industry associations and organizations related to mechanical engineering, automation, and motion control often have resources and publications dedicated to gear motors. These organizations provide technical articles, whitepapers, industry standards, and guidelines related to gear motor design, selection, and application. Examples of such associations include the American Gear Manufacturers Association (AGMA), International Electrotechnical Commission (IEC), and Institute of Electrical and Electronics Engineers (IEEE).

    3. Technical Publications and Journals:

    Technical publications and journals focused on engineering, robotics, and motion control are valuable sources of in-depth knowledge about gear motors. Publications like IEEE Transactions on Industrial Electronics, Mechanical Engineering magazine, or Motion System Design magazine often feature articles, case studies, and research papers on gear motor technology, advancements, and applications. These publications provide authoritative and up-to-date information from industry experts and researchers.

    4. Online Forums and Communities:

    Online forums and communities dedicated to engineering, robotics, and automation can be excellent resources for discussions, insights, and practical experiences related to gear motors. Websites like Stack Exchange, engineering-focused subreddits, or specialized forums provide platforms for individuals to ask questions, share knowledge, and engage in discussions with professionals and enthusiasts in the field. Participating in these communities allows individuals to learn from real-world experiences and gain practical insights.

    5. Educational Institutions and Courses:

    Technical colleges, universities, and vocational training centers often offer courses or programs in mechanical engineering, mechatronics, or automation that cover gear motor fundamentals and applications. These educational institutions provide comprehensive curricula, textbooks, and lecture materials that can serve as reliable resources for individuals interested in learning about gear motors. Additionally, online learning platforms like Coursera, Udemy, or LinkedIn Learning offer courses on topics related to gear motors and motion control.

    6. Trade Shows and Exhibitions:

    Attending trade shows, exhibitions, and industry conferences related to automation, robotics, or motion control provides opportunities to learn about the latest advancements in gear motor technology. These events often feature product demonstrations, technical presentations, and expert panels where individuals can interact with gear motor manufacturers, industry experts, and other professionals. It’s a great way to stay updated on the latest trends, innovations, and applications of gear motors.

    When seeking reliable resources, it’s important to consider the credibility of the source, the expertise of the authors, and the relevance to the specific area of interest. By leveraging these resources, individuals can gain a comprehensive understanding of gear motors and their applications, from basic principles to advanced topics, enabling them to make informed decisions and effectively utilize gear motors in their projects or applications.

    gear motor

    What is the significance of gear reduction in gear motors, and how does it affect efficiency?

    Gear reduction plays a significant role in gear motors as it enables the motor to deliver higher torque while reducing the output speed. This feature has several important implications for gear motors, including enhanced power transmission, improved control, and potential trade-offs in terms of efficiency. Here’s a detailed explanation of the significance of gear reduction in gear motors and its effect on efficiency:

    Significance of Gear Reduction:

    1. Increased Torque: Gear reduction allows gear motors to generate higher torque output compared to a motor without gears. By reducing the rotational speed at the output shaft, gear reduction increases the mechanical advantage of the system. This increased torque is beneficial in applications that require high torque to overcome resistance, such as lifting heavy loads or driving machinery with high inertia.

    2. Improved Control: Gear reduction enhances the control and precision of gear motors. By reducing the speed, gear reduction allows for finer control over the motor’s rotational movement. This is particularly important in applications that require precise positioning or accurate speed control. The gear reduction mechanism enables gear motors to achieve smoother and more controlled movements, reducing the risk of overshooting or undershooting the desired position.

    3. Load Matching: Gear reduction helps match the motor’s power characteristics to the load requirements. Different applications have varying torque and speed requirements. Gear reduction allows the gear motor to achieve a better match between the motor’s power output and the specific requirements of the load. It enables the motor to operate closer to its peak efficiency by optimizing the torque-speed trade-off.

    Effect on Efficiency:

    While gear reduction offers several advantages, it can also affect the efficiency of gear motors. Here’s how gear reduction impacts efficiency:

    1. Mechanical Efficiency: The gear reduction process introduces mechanical components such as gears, bearings, and lubrication systems. These components introduce additional friction and mechanical losses into the system. As a result, some energy is lost in the form of heat during the gear reduction process. The efficiency of the gear motor is influenced by the quality of the gears, the lubrication used, and the overall design of the gear system. Well-designed and properly maintained gear systems can minimize these losses and optimize mechanical efficiency.

    2. System Efficiency: Gear reduction affects the overall system efficiency by impacting the motor’s electrical efficiency. In gear motors, the motor typically operates at higher speeds and lower torques compared to a direct-drive motor. The overall system efficiency takes into account both the electrical efficiency of the motor and the mechanical efficiency of the gear system. While gear reduction can increase the torque output, it also introduces additional losses due to increased mechanical complexity. Therefore, the overall system efficiency may be lower compared to a direct-drive motor for certain applications.

    It’s important to note that the efficiency of gear motors is influenced by various factors beyond gear reduction, such as motor design, control systems, and operating conditions. The selection of high-quality gears, proper lubrication, and regular maintenance can help minimize losses and improve efficiency. Additionally, advancements in gear technology, such as the use of precision gears and improved lubricants, can contribute to higher overall efficiency in gear motors.

    In summary, gear reduction is significant in gear motors as it provides increased torque, improved control, and better load matching. However, gear reduction can introduce mechanical losses and affect the overall efficiency of the system. Proper design, maintenance, and consideration of application requirements are essential to optimize the balance between torque, speed, and efficiency in gear motors.

    gear motor

    In which industries are gear motors commonly used, and what are their primary applications?

    Gear motors find widespread use in various industries due to their versatility, reliability, and ability to provide controlled mechanical power. They are employed in a wide range of applications that require precise power transmission and speed control. Here’s a detailed explanation of the industries where gear motors are commonly used and their primary applications:

    1. Robotics and Automation:

    Gear motors play a crucial role in robotics and automation industries. They are used in robotic arms, conveyor systems, automated assembly lines, and other robotic applications. Gear motors provide the required torque, speed control, and directional control necessary for the precise movements and operations of robots. They enable accurate positioning, gripping, and manipulation tasks in industrial and commercial automation settings.

    2. Automotive Industry:

    The automotive industry extensively utilizes gear motors in various applications. They are used in power windows, windshield wipers, HVAC systems, seat adjustment mechanisms, and many other automotive components. Gear motors provide the necessary torque and speed control for these systems, enabling smooth and efficient operation. Additionally, gear motors are also utilized in electric and hybrid vehicles for powertrain applications.

    3. Manufacturing and Machinery:

    Gear motors find wide application in the manufacturing and machinery sector. They are used in conveyor belts, packaging equipment, material handling systems, industrial mixers, and other machinery. Gear motors provide reliable power transmission, precise speed control, and torque amplification, ensuring efficient and synchronized operation of various manufacturing processes and machinery.

    4. HVAC and Building Systems:

    In heating, ventilation, and air conditioning (HVAC) systems, gear motors are commonly used in damper actuators, control valves, and fan systems. They enable precise control of airflow, temperature, and pressure, contributing to energy efficiency and comfort in buildings. Gear motors also find applications in automatic doors, blinds, and gate systems, providing reliable and controlled movement.

    5. Marine and Offshore Industry:

    Gear motors are extensively used in the marine and offshore industry, particularly in propulsion systems, winches, and cranes. They provide the required torque and speed control for various marine operations, including steering, anchor handling, cargo handling, and positioning equipment. Gear motors in marine applications are designed to withstand harsh environments and provide reliable performance under demanding conditions.

    6. Renewable Energy Systems:

    The renewable energy sector, including wind turbines and solar tracking systems, relies on gear motors for efficient power generation. Gear motors are used to adjust the rotor angle and position in wind turbines, optimizing their performance in different wind conditions. In solar tracking systems, gear motors enable the precise movement and alignment of solar panels to maximize sunlight capture and energy production.

    7. Medical and Healthcare:

    Gear motors have applications in the medical and healthcare industry, including in medical equipment, laboratory devices, and patient care systems. They are used in devices such as infusion pumps, ventilators, surgical robots, and diagnostic equipment. Gear motors provide precise control and smooth operation, ensuring accurate dosing, controlled movements, and reliable functionality in critical medical applications.

    These are just a few examples of the industries where gear motors are commonly used. Their versatility and ability to provide controlled mechanical power make them indispensable in numerous applications requiring torque amplification, speed control, directional control, and load distribution. The reliable and efficient power transmission offered by gear motors contributes to the smooth and precise operation of machinery and systems in various industries.

    China wholesaler CE Approved 0.18kw-15kw Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump distributorsChina wholesaler CE Approved 0.18kw-15kw Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump distributors
    editor by CX 2023-12-07

    China Hot selling Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor with Hot selling

    Product Description

    Production Description

    YE2 Series Cast of Iron Three Phase Induction Motor is specially designed for European market, whose terminal box is located on
    the top of motor.They are totally enclosed and fan-cooling designed. They are newly designed in conformity with the relevant
    requirements / rules of IEC&DIN42673 standards.
     

    Type
     
    YE2 
    Power
     
    0.75~315kw
    Insulation
     
    F / B, H/B
    Voltage and frequency
     
    380/400/415/660/690V  50/60hz
    Speed
     
    3000/1500/1000/750/600 rpm
    Mounitng
     
    IMB3/IMV1
    Cooling and ventilation
     
    TEFC in accordance with IC411 of IEC60034-6.
    Winding
     
    100% Cooper Wire
    Protection class
     
    IP54/IP55
    Vibration
     
    vibration class A, vibration class B is available on request.
    Quality assurance
     
    ISO9001
    Site conditions
     
     from -15°C t0 +40°C and altitude below 1000 meters

    Products Application, Value Added Service

    PinnxunMotor can provide a complete set of optimal solutions for various Applications,Bring innovation and valueadded to our 
    customers, At the same time, we can also formulate special solutions according to the different needed of customer 

    Product  Process
     
    Pinnxun always take good faith, responsibility, carefulness and CHINAMFG as our management philosophy, committedto providing
    customers with superior quality products,every step in processs must be take full attention.

    Qualification certification system

    The key for ‘Pinxing’ long-terms cooperation is to continuously improve the quality of is products and service, By virtue of is
    comprehensive process, quality management system and strict compliance with international mainstream standards.’Pinxing’
    has established a quality management system that has passed ISO9001-2008 Quality management system certification

    ISO14001 Environmental management system.
    ISO9001-2008 Quality management system
    ISO14001 Environmental management system
    CE European Certification
    IECEX CHINAMFG Ex Certification for Ex motors
    ATEX European Ex Certification for Ex motors
    EAC Russia GOST standard Ex certification for Ex motors
    CQC China quality center energy conservation certification

    Worldwide Marketing & Service Network 

    Global Perfect Marketing service network is 1 of Pinxing’s advantage. we have 38 branches in china main city,5 branches in
    the Abroad ,Our business penetrates more than 60 countries and regions including South America, North America,Europe, Asia
    Middle East and Africa, Giving us rapid reach capacity from sales, service, procurement and Transportation since inception, Pinxing
    always uphold the development strategy of market globalization. we segment and position customers needs and target market. our
    products and service are widely used in global industry, and performance stable and safety.we custom different motors for different
    industries

     

    Application: Industrial,Universal,Power Tool
    Speed: High Speed
    Number of Stator: Three-Phase
    Function: Driving
    Casing Protection: Protection Type
    Number of Poles: 2/4/6/8/10/12 Pole
    Customization:
    Available

    |

    China Hot selling Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   with Hot selling	China Hot selling Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   with Hot selling
    editor by CX 2023-10-19