தயாரிப்பு விளக்கம்
K series Bevel-Helical Geared Motor Characteristics
1. Features:
- High efficiency: 92%-93%;
- Vertical output, compact structure, hard tooth surface , large output torque, low noise and long service life.
- High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.
- High interchangeability: highly modular, serial design, strong versatility and interchangeability.
2. Technical parameters
| Ratio | 5.36-197.37 |
| Input power | 0.12-200KW |
| Output torque | 10-62800N.m |
| Output speed | 7-415rpm |
| Mounting type | Foot mounted, foot mounted with CHINAMFG shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
| Brake Release | HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position) |
| Thermistor | TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch) |
| Mounting Position | M1, M2, M3, M4, M5, M6 |
| வகை | K37-K157 |
| Output shaft dis. | 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm |
| Housing material | HT200 high-strength cast iron from R37,47,57,67,77,87 |
| Housing material | HT250 High strength cast iron from R97 107,137,147, 157,167,187 |
| Heat treatment technology | carbonitriding and hardening treatment |
| Single Stage Efficiency | up to 96% |
| Lubricant | VG220 |
| Protection Class | IP55, F class |
Starshine Drive
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. Certification.
All our products get ISO & CE & UL certification.
பேக்கிங்
Delivery
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| விண்ணப்பம்: | Motor, Machinery, Agricultural Machinery |
|---|---|
| செயல்பாடு: | Speed Changing, Speed Reduction |
| தளவமைப்பு: | Corner |
| கடினத்தன்மை: | கடினமாக்கப்பட்ட பல் மேற்பரப்பு |
| நிறுவல்: | Horizontal, Vertical |
| படி: | 2 or 3 Step |
| தனிப்பயனாக்கம்: |
இணையம்
|
|
|---|
கட்டுப்பாட்டுக்காக கியர் மோட்டார்களில் பொதுவாக என்ன வகையான பின்னூட்ட வழிமுறைகள் ஒருங்கிணைக்கப்படுகின்றன?
கியர் மோட்டார்கள் பெரும்பாலும் கட்டுப்பாட்டை வழங்கவும் அவற்றின் செயல்திறனை மேம்படுத்தவும் பின்னூட்ட வழிமுறைகளை இணைத்துக்கொள்கின்றன. இந்த பின்னூட்ட வழிமுறைகள் மோட்டார் பல்வேறு அளவுருக்களின் அடிப்படையில் அதன் செயல்பாட்டைக் கண்காணித்து சரிசெய்ய உதவுகின்றன. கியர் மோட்டார்களில் பொதுவாக ஒருங்கிணைக்கப்பட்ட சில பின்னூட்ட வழிமுறைகள் இங்கே:
1. குறியாக்கி கருத்து:
ஒரு குறியாக்கி என்பது மோட்டாரின் இயந்திர இயக்கத்தை மின் சமிக்ஞைகளாக மாற்றுவதன் மூலம் நிலை மற்றும் வேக பின்னூட்டத்தை வழங்கும் ஒரு சாதனமாகும். கியர் மோட்டார்களில் பொதுவாகப் பயன்படுத்தப்படும் குறியாக்கிகள் பின்வருமாறு:
- அதிகரிக்கும் குறியாக்கிகள்: இந்த குறியாக்கிகள், ஒரு குறிப்புப் புள்ளியுடன் தொடர்புடைய மோட்டாரின் தண்டு நிலை மற்றும் வேகம் பற்றிய தகவல்களை வழங்குகின்றன. மோட்டார் சுழலும்போது அவை துடிப்புகளை உருவாக்குகின்றன, இது நிலை மற்றும் வேக மாற்றங்களை துல்லியமாக அளவிட அனுமதிக்கிறது.
- முழுமையான குறியாக்கிகள்: முழுமையான குறியாக்கிகள் ஒரு முழு சுழற்சிக்குள் மோட்டாரின் தண்டின் துல்லியமான நிலையை வழங்குகின்றன. அவற்றுக்கு ஒரு குறிப்பு புள்ளி தேவையில்லை மற்றும் மின்சாரம் இழப்பு அல்லது மோட்டார் மறுதொடக்கம் செய்யப்பட்ட பிறகும் துல்லியமான கருத்துக்களை வழங்குகின்றன.
2. ஹால் எஃபெக்ட் சென்சார்கள்:
ஹால் விளைவு உணரிகள், காந்தப்புலத்தின் இருப்பு மற்றும் வலிமையைக் கண்டறிய ஹால் விளைவின் கொள்கையைப் பயன்படுத்துகின்றன. அவை பொதுவாக வேகம் மற்றும் நிலை உணர்தலுக்காக கியர் மோட்டார்களில் பயன்படுத்தப்படுகின்றன. ஹால் விளைவு உணரிகள் மோட்டாரின் காந்தப்புலத்தில் ஏற்படும் மாற்றங்களைக் கண்டறிந்து அவற்றை மின் சமிக்ஞைகளாக மாற்றுவதன் மூலம் கருத்துக்களை வழங்குகின்றன.
3. தற்போதைய சென்சார்கள்:
மின்னோட்ட உணரிகள் மோட்டாரின் முறுக்குகள் வழியாக பாயும் மின்சாரத்தை கண்காணிக்கின்றன. மின்னோட்டத்தை அளவிடுவதன் மூலம், இந்த உணரிகள் மோட்டாரின் முறுக்குவிசை, சுமை நிலைமைகள் மற்றும் மின் நுகர்வு குறித்து கருத்துக்களை வழங்குகின்றன. மின்னோட்ட வரம்பு, அதிகப்படியான மின்னோட்ட பாதுகாப்பு மற்றும் மூடிய-லூப் கட்டுப்பாடு போன்ற மோட்டார் கட்டுப்பாட்டு உத்திகளுக்கு மின்னோட்ட உணரிகள் அவசியம்.
4. வெப்பநிலை உணரிகள்:
மோட்டாரின் வெப்பநிலையைக் கண்காணிக்க வெப்பநிலை உணரிகள் கியர் மோட்டார்களில் ஒருங்கிணைக்கப்படுகின்றன. அவை மோட்டாரின் வெப்ப நிலைகள் குறித்த கருத்துக்களை வழங்குகின்றன, இதனால் கட்டுப்பாட்டு அமைப்பு அதிக வெப்பமடைவதைத் தடுக்க மோட்டாரின் செயல்பாட்டை சரிசெய்ய அனுமதிக்கிறது. மோட்டாரின் நம்பகத்தன்மையை உறுதி செய்வதற்கும் அதிகப்படியான வெப்பத்தால் ஏற்படும் சேதத்தைத் தடுப்பதற்கும் வெப்பநிலை உணரிகள் மிக முக்கியமானவை.
5. ஹால் விளைவு வரம்பு சுவிட்சுகள்:
ஒரு குறிப்பிட்ட வரம்பிற்குள் ஒரு காந்தப்புலம் இருப்பதையோ அல்லது இல்லாதிருப்பதையோ கண்டறிய ஹால் விளைவு வரம்பு சுவிட்சுகள் பயன்படுத்தப்படுகின்றன. அவை பொதுவாக கியர் மோட்டார்களில் பயணத்தின் முடிவு அல்லது வரம்பு சுவிட்சுகளாகப் பயன்படுத்தப்படுகின்றன. ஹால் விளைவு வரம்பு சுவிட்சுகள் கட்டுப்பாட்டு அமைப்புக்கு கருத்துக்களை வழங்குகின்றன, மோட்டார் ஒரு குறிப்பிட்ட நிலையை அடைந்ததும் அல்லது அனுமதிக்கப்பட்ட வரம்பிற்கு அப்பால் நகர்ந்ததும் என்பதைக் குறிக்கிறது.
6. ரிசால்வர் கருத்து:
ரிசால்வர் என்பது சுழலும் தண்டின் நிலை மற்றும் வேகத்தை தீர்மானிக்கப் பயன்படும் ஒரு மின்காந்த சாதனமாகும். இது தண்டின் கோண நிலைக்கு ஒத்த சைன் மற்றும் கோசைன் சமிக்ஞைகளை உருவாக்குவதன் மூலம் பின்னூட்டத்தை வழங்குகிறது. துல்லியமான நிலை மற்றும் வேகக் கட்டுப்பாடு தேவைப்படும் உயர் செயல்திறன் கொண்ட கியர் மோட்டார்களில் ரிசால்வர் பின்னூட்டம் பொதுவாகப் பயன்படுத்தப்படுகிறது.
இந்த பின்னூட்ட வழிமுறைகள், கியர் மோட்டார்களில் ஒருங்கிணைக்கப்படும்போது, பல்வேறு மோட்டார் அளவுருக்களின் துல்லியமான கட்டுப்பாடு, கண்காணிப்பு மற்றும் சரிசெய்தலை செயல்படுத்துகின்றன. குறியாக்கிகள், ஹால் விளைவு உணரிகள், மின்னோட்ட உணரிகள், வெப்பநிலை உணரிகள், வரம்பு சுவிட்சுகள் அல்லது ரிசால்வர்களிடமிருந்து பின்னூட்ட சமிக்ஞைகளைப் பயன்படுத்துவதன் மூலம், கட்டுப்பாட்டு அமைப்பு மோட்டாரின் செயல்திறனை மேம்படுத்தலாம், துல்லியமான நிலைப்பாட்டை உறுதி செய்யலாம், வேகக் கட்டுப்பாட்டைப் பராமரிக்கலாம் மற்றும் அதிகப்படியான சுமைகள் அல்லது அதிக வெப்பத்திலிருந்து மோட்டாரைப் பாதுகாக்கலாம்.
Are there environmental benefits to using gear motors in certain applications?
Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:
1. Energy Efficiency:
Gear motors can improve energy efficiency in various ways:
- Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
- Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.
2. Reduced Resource Consumption:
The use of gear motors can lead to reduced resource consumption and environmental impact:
- Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
- Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.
3. Noise Reduction:
Gear motors can contribute to a quieter and more environmentally friendly working environment:
- இரைச்சல் தணிப்பு: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.
4. Precision and Control:
Gear motors offer enhanced precision and control, which can lead to environmental benefits:
- Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
- Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.
In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.
கியர் மோட்டார்களில் பயன்படுத்தப்படும் பல்வேறு வகையான கியர்கள் யாவை, அவை செயல்திறனை எவ்வாறு பாதிக்கின்றன?
கியர் மோட்டார்களில் பல்வேறு வகையான கியர்கள் பயன்படுத்தப்படுகின்றன, ஒவ்வொன்றும் அதன் தனித்துவமான பண்புகள் மற்றும் செயல்திறனில் தாக்கத்தைக் கொண்டுள்ளன. கியர் வகையின் தேர்வு, முறுக்குவிசை, வேகம், செயல்திறன், இரைச்சல் நிலை மற்றும் இடக் கட்டுப்பாடுகள் உள்ளிட்ட பயன்பாட்டின் குறிப்பிட்ட தேவைகளைப் பொறுத்தது. கியர் மோட்டார்களில் பயன்படுத்தப்படும் பல்வேறு வகையான கியர்கள் மற்றும் செயல்திறனில் அவற்றின் தாக்கம் பற்றிய விரிவான விளக்கம் இங்கே:
1. ஸ்பர் கியர்கள்:
ஸ்பர் கியர்கள் என்பது கியர் மோட்டார்களில் பயன்படுத்தப்படும் மிகவும் பொதுவான வகை கியர்கள் ஆகும். அவை கியரின் அச்சுக்கு இணையாக நேரான பற்களைக் கொண்டுள்ளன மற்றும் சக்தியை கடத்த மற்றொரு ஸ்பர் கியருடன் இணைக்கப்பட்டுள்ளன. ஸ்பர் கியர்கள் அதிக செயல்திறன், நம்பகமான செயல்பாடு மற்றும் செலவு-செயல்திறனை வழங்குகின்றன. இருப்பினும், பற்கள் பிணைக்கப்படுவதால் அவை குறிப்பிடத்தக்க சத்தத்தை உருவாக்க முடியும், மேலும் அவை அச்சு உந்துதல் விசைகளை உருவாக்கக்கூடும். அதிக முறுக்குவிசை பரிமாற்றம் மற்றும் மிதமான முதல் அதிக சுழற்சி வேகம் தேவைப்படும் பயன்பாடுகளுக்கு ஸ்பர் கியர்கள் பொருத்தமானவை.
2. ஹெலிகல் கியர்கள்:
ஹெலிகல் கியர்கள், கியரின் அச்சுக்கு ஒரு கோணத்தில் வெட்டப்பட்ட கோணப் பற்களைக் கொண்டுள்ளன. இந்த ஹெலிகல் பல் உள்ளமைவு படிப்படியாக ஈடுபாட்டையும் மென்மையான பல் தொடர்பையும் செயல்படுத்துகிறது, இதன் விளைவாக ஸ்பர் கியர்களுடன் ஒப்பிடும்போது சத்தம் மற்றும் அதிர்வு குறைகிறது. ஹெலிகல் கியர்கள் அதிக சுமை-சுமக்கும் திறனை வழங்குகின்றன மற்றும் அதிக முறுக்குவிசை பரிமாற்றம் மற்றும் மிதமான முதல் அதிக சுழற்சி வேகம் தேவைப்படும் பயன்பாடுகளுக்கு ஏற்றவை. அவை பொதுவாக குறைந்த இரைச்சல் செயல்பாடு விரும்பும் கியர் மோட்டார்களில் பயன்படுத்தப்படுகின்றன, எடுத்துக்காட்டாக, வாகன பயன்பாடுகள் மற்றும் தொழில்துறை இயந்திரங்கள்.
3. பெவல் கியர்கள்:
பெவல் கியர்களில் கூம்பு வடிவ மேற்பரப்பில் வெட்டப்பட்ட பற்கள் உள்ளன. அவை பொதுவாக செங்கோணங்களில், வெட்டும் தண்டுகளுக்கு இடையில் சக்தியை கடத்தப் பயன்படுகின்றன. பெவல் கியர்களில் நேரான பற்கள் (நேரான பெவல் கியர்கள்) அல்லது வளைந்த பற்கள் (சுழல் பெவல் கியர்கள்) இருக்கலாம். தண்டுகள் திசையை மாற்ற வேண்டிய பயன்பாடுகளில் இந்த கியர்கள் திறமையான சக்தி பரிமாற்றத்தையும் துல்லியமான இயக்கக் கட்டுப்பாட்டையும் வழங்குகின்றன. பெவல் கியர்கள் பொதுவாக ஸ்டீயரிங் அமைப்புகள், இயந்திர கருவிகள் மற்றும் அச்சு இயந்திரங்கள் போன்ற பயன்பாடுகளுக்கு கியர் மோட்டார்களில் பயன்படுத்தப்படுகின்றன.
4. வார்ம் கியர்கள்:
வார்ம் கியர்கள் ஒரு வார்ம் (ஒரு வகை திருகு) மற்றும் வார்ம் வீல் அல்லது வார்ம் கியர் எனப்படும் ஒரு இனச்சேர்க்கை கியரைக் கொண்டுள்ளன. வார்ம் வீலுடன் இணைக்கும் ஒரு சுருள் நூலைக் கொண்டுள்ளது, இதன் விளைவாக ஒரு சிறிய மற்றும் உயர் கியர் குறைப்பு விகிதம் ஏற்படுகிறது. வார்ம் கியர்கள் அதிக முறுக்குவிசை பரிமாற்றம், குறைந்த இரைச்சல் செயல்பாடு மற்றும் சுய-பூட்டுதல் பண்புகளை வழங்குகின்றன, அவை தலைகீழ் இயக்கத்தைத் தடுக்கின்றன. தூக்கும் வழிமுறைகள், கன்வேயர் அமைப்புகள் மற்றும் இயந்திர கருவிகள் போன்ற உயர் கியர் குறைப்பு மற்றும் பூட்டுதல் திறன்கள் தேவைப்படும் பயன்பாடுகளுக்கு கியர் மோட்டார்களில் அவை பொதுவாகப் பயன்படுத்தப்படுகின்றன.
5. கோள் கியர்கள்:
எபிசைக்ளிக் கியர்கள் என்றும் அழைக்கப்படும் கோள் கியர்கள், ஒரு மைய சூரிய கியர், பல கோள் கியர்கள் மற்றும் ஒரு வெளிப்புற வளைய கியர் ஆகியவற்றைக் கொண்டுள்ளன. கோள் கியர்கள் சூரிய கியர் மற்றும் வளைய கியர் இரண்டையும் இணைத்து, ஒரு சிறிய மற்றும் திறமையான கியர் அமைப்பை உருவாக்குகின்றன. கோள் கியர்கள் அதிக முறுக்குவிசை பரிமாற்றம், அதிக கியர் குறைப்பு விகிதங்கள் மற்றும் சிறந்த சுமை விநியோகத்தை வழங்குகின்றன. ரோபாட்டிக்ஸ், ஆட்டோமொடிவ் டிரான்ஸ்மிஷன்கள் மற்றும் தொழில்துறை இயந்திரங்கள் போன்ற உயர் முறுக்குவிசை மற்றும் சிறிய அளவு தேவைப்படும் பயன்பாடுகளுக்கு கியர் மோட்டார்களில் அவை பொதுவாகப் பயன்படுத்தப்படுகின்றன.
6. ரேக் மற்றும் பினியன்:
ரேக் மற்றும் பினியன் கியர்கள் ஒரு நேரியல் ரேக் (நேரான பல் கொண்ட பட்டை) மற்றும் ஒரு பினியன் கியர் (சிறிய விட்டம் கொண்ட ஒரு ஸ்பர் கியர்) ஆகியவற்றைக் கொண்டுள்ளன. பினியன் கியர் ரேக்குடன் இணைந்து சுழலும் இயக்கத்தை நேரியல் இயக்கமாக மாற்றுகிறது அல்லது நேர்மாறாகவும். ரேக் மற்றும் பினியன் கியர்கள் துல்லியமான நேரியல் இயக்கக் கட்டுப்பாட்டை வழங்குகின்றன மற்றும் பொதுவாக நேரியல் ஆக்சுவேட்டர்கள், CNC இயந்திரங்கள் மற்றும் ஸ்டீயரிங் அமைப்புகள் போன்ற பயன்பாடுகளுக்கு கியர் மோட்டார்களில் பயன்படுத்தப்படுகின்றன.
ஒரு கியர் மோட்டாரில் கியர் வகையைத் தேர்ந்தெடுப்பது விரும்பிய முறுக்குவிசை, வேகம், செயல்திறன், இரைச்சல் நிலை மற்றும் இடக் கட்டுப்பாடுகள் போன்ற காரணிகளைப் பொறுத்தது. ஒவ்வொரு வகை கியர் குறிப்பிட்ட நன்மைகளை வழங்குகிறது மற்றும் கியர் மோட்டரின் செயல்திறனை வித்தியாசமாக பாதிக்கிறது. பொருத்தமான கியர் வகையைத் தேர்ந்தெடுப்பதன் மூலம், கியர் மோட்டார்கள் அவற்றின் நோக்கம் கொண்ட பயன்பாடுகளுக்கு உகந்ததாக்கப்படலாம், இது திறமையான மற்றும் நம்பகமான மின் பரிமாற்றத்தை உறுதி செய்கிறது.
editor by CX 2024-02-23